Home / Materials and products
Materials and products
We supply carbon fibre materials and finished composite products, and design the moulds and tooling to produce them, for customers in sport, industry, mobility and architecture.
Product range
| Product | Description | Typical formats |
|---|---|---|
| Carbon fibre fabrics | 3K plain and twill woven fabrics for hand lay-up, wet lay-up and infusion; unidirectional fabrics for directional strength | ≈ 160–400 g/m² rolls or cut to size |
| CFRP sheets and plates | Flat laminated sheets, plain or twill finish, gloss or matt, for structural, machine and decorative use | ≈ 0.5–5 mm standard or cut-to-size |
| CFRP tubes and rods | Round tubes and solid rods for frames, booms, shafts and structural members | custom diameters and lengths |
| Custom moulded parts | Panels, enclosures, housings, ducts and brackets produced in our own moulds | per drawing or sample |
| Resins and consumables | Epoxy laminating and infusion resins, release agents, peel ply, breather, infusion mesh, vacuum bag film, sealant tape, core materials | kits and bulk |
| Moulds and tooling | Plug and mould design, tooling-board machining, GRP and composite moulds, split moulds and mandrels | per project |
Formats are typical. Availability, grades and exact specifications are confirmed against the manufacturer datasheet at the time of order. Units: g/m² fabric areal weight, mm sheet thickness.
Why carbon fibre
CFRP properties depend on fibre direction. Strength is highest along the fibre.
The figures below are indicative, for comparison only.
| Property (indicative) | CFRP laminate | Aluminium 6061-T6 | Mild steel |
|---|---|---|---|
| Tensile strength | ≈ 500–1,500 MPa UD along fibre: 2,000+ | ≈ 310 MPa | ≈ 400–550 MPa |
| Elastic modulus | ≈ 70–150 GPa | ≈ 69 GPa | ≈ 200 GPa |
| Corrosion resistance | Excellent | Good | Needs protection |
| Fatigue performance | Excellent | Moderate | Moderate |
Typical ranges for standard-modulus carbon fibre composites. Values vary with fibre grade, resin, fibre volume fraction and lay-up. Confirm against datasheets before design use.
Fabrics, sheets and laminates
Our sheets are laminated from woven carbon fabrics in balanced, symmetric ply schedules, so they stay flat and perform predictably.
Twill drapes over curved moulds. Plain weave is stable and flat. Unidirectional plies put the strength where the load path needs it.
Need a format that is not listed? Send the size, thickness and quantity.
Request a quotation